Tuesday, June 4, 2013

Working with the dirt when painting!

Hey again!  Sausha from Sweet Pickins here showing you an easy technique to use when working with dirty furniture :)


I finished up this table a quite a while ago but just found some pics of it while going through some stuff.  I really loved the way this table turned out and have always love the finish and the color.  
One of the reasons that i loved the table so much was how the final finished texture was.  It looked like the table had been painted for years and had a very authentic worn look to it.
To achieve the finish, i just left on all the old build up dirt(i think this table must have been stored in a garage or barn for sometime, thats why so much dirt) and flaking lacquer while i painted.  Yup, thats right, left the dirt right on it!  No cleaning or prepping here!  Dont scrape, sand, flake off or touch that old dirt and peeling paint :)
But dont worry, after you paint and then distress all that dirt and build up will come right off.
I started out with a boring brown table but with awesome lines – those legs are killer.
sweet pickins furniture
You can see in the pic below just how worn out and flaky the old finish was.  I didnt touch anything, i just left it as it was and painted right over it, i sprayed the new paint on (very thinly and just one coat), but you can just as easily brush it on, but keep it light.   By leaving all the dirt and old flaking paint on, this caused the fresh paint that was put on not to stick.  Normally thats not a good thing, but this time it will work to our advantage.
sweet pickins furniture
Because the paint didnt stick to all the wood, it was very easy to distress.  I just used a combo of steel wool, sanding blocks and sand paper – i used all 3 just because there were so many different surfaces to the table and steel wool was easier for the curved parts, sanding block for the flat parts, etc.
**By the way, because i was going for the super distressed worn look, i DID NOT prime the table**
sweet pickins furniture (2)
After i gave everything a good sanding to remove all the old dirt and flaky lacquer, i just took some minwax stain on a rag and wiped it all over the table.  This set into all the cracks as well as staining the thirsty dry wood a darker color.  In person you could see it better, but the dark stain set into all the tiny cracks where the paint didnt stick and created an awesome look, almost like a crackled finish in some spots.
sweet pickins furniture
sweet pickins furniture
After the table was all distressed and wiped down with stain, the table was clear coated.  I personally like a heavily distressed piece with a shiny clear coat so thats what i did here.  It doesnt work with all furniture, but i thought it worked well on this one.
The top was also sanded down and re stained with Minwax in Provincial.
sweet pickins furniture (4)
Oh man, look how purdy that finish is!  I just love it :)
sweet pickins furniture (5)
sweet pickins furniture (8)
sweet pickins furniture (7)

411

Paint – Sherwin Williams Intense Teal
Glaze – Minwax Provincial
Clear coat – Varathane in Gloss
Stain for top – Minwax Provincial


If you like what you see here be sure to check out our 24/7 Online Boutique Reclaim-ologists and Other Crafty Chicks!


4 comments:

  1. thanks for sharing! This may be a dumb question, but for the 1st coat of paint what kind of sprayer did you use?

    ReplyDelete
    Replies
    1. I use a graco 7.0 pro finish HVLP sprayer - its awesome :)

      Delete
  2. Thanks so much for sharing, yes, it looks like an old finish. So smart!

    ReplyDelete